disc spring din 2093

din 2093 5 dimensions and designation conical disc spring of group 1 or 2 conical disc spring of group 3 figure 1: cross section of a single disc, including the relevant points of loading designation of a conical disc spring of spring series a with an outside diameter, de, of 40 mm: conical disc spring din 2093 — a 40 page 3 where a particular

Our disc springs Belleville are disc springs from the inch size range and often have larger material thicknesses and proportions than the comparable standardized EN 16983 (DIN 2093) disc springs.

To DIN 2093 ( Belleville Springs – Metric Series) Designed to DIN 2092 and manufactured to DIN 2093. Made from high quality spring steel strip and forgings; subject to close tolerances these are the industry standard for quality. Belleville Washers ( Belleville Springs – Imperial Series)

Springs with a thickness of more than 6mm, DIN 2093 specifies small contact surfaces at point I III in Addition to the rounded corners. These contact flats 

DIN 2093 Disc Spring Washer made of steel 60Si2Mn, phosphate, Dia. 6mm-200mm from China Disc Spring Washer Manufacturer. DIN 2093 Disc Spring Washer Standard: DIN 2093 Series A/B/C Material

The 40mm x 20.4mm x 2.25mm Disc Springs (DIN 2093) - Black Stainless Steel (303) has the following features: DIN 2093 Manufacturing Standard; 40mm External 

SPIROL offers the full range of DIN EN 16983 (formerly DIN 2093) Group 1 and 2 Disc Springs in Series A, B, and C. In addition to the DIN specified sizes, SPIROL stocks its own standard

Material: Springs Steel • = execution group 3 subject to availability. Example of designation: Disc springs 6 X 3,2 X 0,3 - T -. D = external diameter mm

The disc springs mentioned above acc. to ≈ DIN 2093 are suitable for general use. For more critical applications it is advised to choose disc springs from the article groups 36300, 36302, 36303 and 36450. Group 1: t 1,25 from steel C67S. Group 2: 1,25 ≤ t ≤ 6,0 from steel 51 Cr V4 (edges of these disc springs are not machined).

For disc springs with a thickness of more than 6.0mm, DIN 2093 specifies small contact surfaces at points l and lll in addition to the rounded corners.

This classification corresponds, according to DIN 2093 standard, to a specific relation between the external diameter of the disc spring and its thickness. The three series for each standard